1000W SILENT PRO GOLD
Cooler Master PSU
Features
Hybrid Transformer:
Specially design transformer to improve thermal and efficiency.
Patent design transformer mount with heat sink, the size was reduced by up to25%
than the
traditional transformer providing lesser energy consumption, while conducting
the heat for better
overall efficiency
HTT - Heat Transfer technology:
Patent design "L" shaped heat sink layout
This technology helps to guide the air flow along the heat sink to improve
the air circulation for
maximum performance.
Single 12 V Power Rail
Tackling challenges from the most power-intensive peripherals head on, this
solitary 12 V power rail
provides ample power and strong resistance to any overloading.
Double-Layer EMI Filter
Dual protection form electromagnetic interference, thus restraining noise
and interference for greater protection
for you and your connections.
Intel Compliant
ATX12V v 2.3 and EPS version 2.91 compliant.
Intelligent Fan
Speed Control
Speed control makes the 120 mm
fan adept for any user's circumstances and need.
Active PFC + PWM Combo Controller
Integrating this active controller with increase the efficiency of any
computer, making PFC higher than 99%
Multiple Protection Design
Over voltage protection (OVP), Under Voltage Protection (UVP), Over Power
Protection (OPP),
Over Temperature Protection (OTP), Short Circuit Protection (SCP) and Over
Current Protection (OCP).
Efficient Transformer
-Adeptly holding power for minumal loss in the 5V standby voltage so the
system is promptly up and ready
from power on or sleep modes
-Highly efficient design on par with 80Plus Gold requirements (90% typical)
And More
-Multiple updated connectors for all types of interfacers (PCIe, SATA etc)
-Simple cable management utilizing flat modular cables for increased airflow.
-High reliability with adn MBTF of at least 100,000 hours of use.
-NVIDIA SLI-Ready Certified guarantees enough ample power and up-to date
connectors for SLI graphics cards.
| Model |
RS-A00-80GA-D3 |
| Type |
Intel
Form Factor ATX 12V V2.3
SSI Form Factor EPS 12V V2.92 |
| Input
Voltage |
90-264Vac
(Auto Range) |
| Input
Current |
11 -
5.5 A |
| Input
Frequency Range |
47-63Hz |
| PFC |
Active PFC (0.99) |
| Power Good Signal |
100~500ms |
| Hold Up
Time |
>17ms |
| Efficiency |
90%
typical |
| MTBF |
>100,000
hours |
| Protection |
OVP
/ UVP / OCP / OPP / OTP / SCP |
| Output
Capacity |
1000W |
| Max.
Output Capacity |
1200W |
| Operation
Temperature |
0~40°C
(Nominal Input Voltage) |
| Fan |
135mm
Ultra Silent Fan |
|
Certifications |
SLI
/ CrossFire / 80 Plus Gold |
| Connector |
M/B
20 + 4 pins x 1
CPU 4 + 4 pins x 2
PCI-e 6+2 pins x 4 / PCI-e 6 pins x 4
(One PCI-e 6+2 pins connector
extends to one PCI-e 6 pins connector)
SATA x 9 / Peripheral 4 pins x 4
Floppy 4 pins x 1
|